24V@10A&12V@10A 14DR S2 PTC
SKU: T2SSK75F14D1T2SSK75F14D
14-Door Altronix/Lenel-S2 Access and Power Integration Kit - Trove2SS2 with eFlow104NB, eFlow102NB, (2) ACM8CB, (2) PD8ULCB, RSB2
Altronix T2SSK75F14D kit consists of Trove2 enclosure, TSS2 Lenel-S2 (S2 Security Platform) / Altronix backplane with one (1) 24VDC @ 10A power supply/charger, one (1) 12VDC @ 10A power supply/charger, two (2) PTC access power controllers and two (2) PTC power distribution modules.
This kit also accommodates S2-INST Installation Kit For Lenel-S2 (S2 Security Platform) S2 Network Node for up to fourteen (14) doors in a single enclosure. Trove simplifies board layout and wire management, reduces installation time and labor costs.
eFlow104NB Power Supply/Charger - 1
Input
- Voltage: 120VAC, 60Hz, 4.5A max.
- Input Fuse: 6.3A / 250V.
Outputs
- Voltage: 24VDC @ 10A.
- Auxiliary: 1A (unswitched).
- Protection: Overvoltage protection. Filtered and regulated.
eFlow102NB Power Supply/Charger - 2
Input
- Voltage: 120VAC, 60Hz, 3.5A max.
- Input Fuse: 5A / 250V.
Output
- Voltage: 12VDC @ 10A.
- Auxiliary: 1A (unswitched).
- Protection: Overvoltage protection. Filtered and regulated.
Both Power Supplies Battery Backup (not included)
- Type: Sealed lead acid or gel type.
- Fuse Rating: 15A / 32VDC.
- Failover: Upon AC loss, instantaneous.
Fire Alarm Disconnect
- Supervised: Latching or non latching.
- EOL: 10K Resistor.
Supervision
- AC Failure: Form “C” contacts.
- Battery: Form “C” contacts.
- Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge.
Indicators LED
- Input: 120VAC is present.
- DC Output: Powered.
- Battery: Discharged or not connected.
Two (2) PD8ULCB Power Distribution Modules
Input
- Voltage: 24VDC from eFlow104NB or 12VDC from eFlow102NB.
Outputs
- Voltage: 24VDC or 12VDC.
- Output PTCs: 2.5A.
Indicators (LED)
- Green LED: DC Output.
Two (2) ACM8CB Access Power Controllers
Input
- Voltage: 24VDC from eFlow104NB or 12VDC from eFlow102NB.
- Input Fuse: 10A / 250V.
Outputs
- Voltage: 24VDC or 12VDC.
- Eight (8) 24VDC and eight (8) 12VDC independently controlled PTC outputs:
- a) Fail-Safe and/or Fail-Secure power outputs.
- b) Auxiliary power outputs (unswitched).
- c) Any combination of the above.
Outputs Ratings
- PTCs: 2.5A.
Indicators (LED)
- Red LEDs: Outputs are triggered (relays energized).
- Green LED: FACP disconnect is triggered.
Environmental
Temperature
- Operating: 0° C to 50° C (32° F to 122° F).
- Storage: - 20° C to 70° C ( - 4° F to 158° F).
Relative Humidity
- Relative Humidity 85% +/- 5%.
BTU/Hr (approx.):
- 191 BTU/Hr.
- Shipping info
We deliver worldwide
- Payment methods
- Return Policy
We accept returns
- Customer Reviews
Check out our customer Reviews
T2SSK75F14D
14-Door Altronix/Lenel-S2 Access and Power Integration Kit - Trove2SS2 with eFlow104NB, eFlow102NB, (2) ACM8CB, (2) PD8ULCB, RSB2
Altronix T2SSK75F14D kit consists of Trove2 enclosure, TSS2 Lenel-S2 (S2 Security Platform) / Altronix backplane with one (1) 24VDC @ 10A power supply/charger, one (1) 12VDC @ 10A power supply/charger, two (2) PTC access power controllers and two (2) PTC power distribution modules.
This kit also accommodates S2-INST Installation Kit For Lenel-S2 (S2 Security Platform) S2 Network Node for up to fourteen (14) doors in a single enclosure. Trove simplifies board layout and wire management, reduces installation time and labor costs.
eFlow104NB Power Supply/Charger - 1
Input
- Voltage: 120VAC, 60Hz, 4.5A max.
- Input Fuse: 6.3A / 250V.
Outputs
- Voltage: 24VDC @ 10A.
- Auxiliary: 1A (unswitched).
- Protection: Overvoltage protection. Filtered and regulated.
eFlow102NB Power Supply/Charger - 2
Input
- Voltage: 120VAC, 60Hz, 3.5A max.
- Input Fuse: 5A / 250V.
Output
- Voltage: 12VDC @ 10A.
- Auxiliary: 1A (unswitched).
- Protection: Overvoltage protection. Filtered and regulated.
Both Power Supplies Battery Backup (not included)
- Type: Sealed lead acid or gel type.
- Fuse Rating: 15A / 32VDC.
- Failover: Upon AC loss, instantaneous.
Fire Alarm Disconnect
- Supervised: Latching or non latching.
- EOL: 10K Resistor.
Supervision
- AC Failure: Form “C” contacts.
- Battery: Form “C” contacts.
- Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge.
Indicators LED
- Input: 120VAC is present.
- DC Output: Powered.
- Battery: Discharged or not connected.
Two (2) PD8ULCB Power Distribution Modules
Input
- Voltage: 24VDC from eFlow104NB or 12VDC from eFlow102NB.
Outputs
- Voltage: 24VDC or 12VDC.
- Output PTCs: 2.5A.
Indicators (LED)
- Green LED: DC Output.
Two (2) ACM8CB Access Power Controllers
Input
- Voltage: 24VDC from eFlow104NB or 12VDC from eFlow102NB.
- Input Fuse: 10A / 250V.
Outputs
- Voltage: 24VDC or 12VDC.
- Eight (8) 24VDC and eight (8) 12VDC independently controlled PTC outputs:
- a) Fail-Safe and/or Fail-Secure power outputs.
- b) Auxiliary power outputs (unswitched).
- c) Any combination of the above.
Outputs Ratings
- PTCs: 2.5A.
Indicators (LED)
- Red LEDs: Outputs are triggered (relays energized).
- Green LED: FACP disconnect is triggered.
Environmental
Temperature
- Operating: 0° C to 50° C (32° F to 122° F).
- Storage: - 20° C to 70° C ( - 4° F to 158° F).
Relative Humidity
- Relative Humidity 85% +/- 5%.
BTU/Hr (approx.):
- 191 BTU/Hr.
The mission of WorldEyeCam, Inc.is to provide consumers with the most up to date security products at the best prices available on the market today. As security is advancing at such a rapid rate we try to exceed our customers expectations by providing unparallel customers service and technical support. We strive to stay on the forefront of the most up to date products and news in regards to our industry. Our website www.Worldeyecam.com contains a broad spectrum of surveillance products as well as industry information. Our website is updated daily as we make our way through this technological wave of security products. Our goal and focus is to stay on top of the latest innovations in technology and securities and to remain a trusted industry leader for years to come.
WorldEyeCam is a CCTV products distribution and integration company located in Southern California in the heart of Orange County. We operate out of a 14,000 sq.ft warehouse & a separate product demo show room. We proudly offer 1st class technical support for our customers we serve with the complete understanding that it is you, the customer that matters to every successful business. If you haven't already learned the hard way, you will understand that it takes more than just a website and the ability to sell a product - anyone can sell a product! But, it takes commitment to offerDEPENDABLE AND CONSISTENT technical support & customer SERVICE AFTER THE SALE. We stand behind our products 100% and we are in it for the long haul & to keep you, the customer happy.
Why Buy From The Worldeyecam Security Store. 30 Day Money Back Guarantee Latest Product Version Guarantee Fast Accurate Same Day Shipping Friendly customer service.
We are committed to providing our customers with "Complete Purchasing Experience Satisfaction" This means quality customer service from pre-purchase support, easy secure encrypted ordering, fast UPS shipping , comprehensive after sales tech-support by certified professionals and hassle free returns.
Shipping Information
FREE UPS Ground Shipping Continental US addresses on all orders over $1000.00 All in stock items are usually shipped Same Day (*not including weekends and holidays). For any Order for Bulk Cables that weigh over 75 lbs will be charged extra. Orders placed before 3 pm PST, or 2 pm for Expedited orders (Next Business Day Air or 2nd Business Day Air) can usually be shipped the same day. Orders placed by internet or by phone receive the same priority handling.
EZ - Hassle FREE - Returns
WorldEyeCam provides a 15-30-day money back guarantee on all products and services purchased, except special order items and all international orders. If for any reason you are not satisfied with your purchase, simply notify us by using this form here:
Submit RMA Return Form *Click Here* and we will immediately issue a Return Material Authorization Number.