GeoVision How do I record video (all cameras) by input trigger?


GeoVision
Back to GeoVision Support | Support Home

To start/stop recording on all cameras by input(s)
Note: no video will be recorded when input trigger is off.

  1. Click on Configure button, System Configure, Camera Configure.
  2. To record base on motion when input is triggered, select Motion Detection . Or to record continuously when input is triggered, select Round-the-clock instead.
  3. Apply the same setting on all cameras.
  4. Click OK.
    1.JPG
  5. Click on Configure, Accessories, I/O Device, I/O Application Setting.
  6. Select the Input number, then check Momentary Mode and designate input(s) to Start and Stop Monitoring.
  7. Click OK.
    3.JPG
  8. Click on Monitoring button, then start I/O Monitoring.