GV-IP Decoder Box Plus decode up to 64 IP streams, support for 10/100/1000 Ethernet over LAN 140-IPDECO-P00

**THIS PRODUCT IS END OF LIFE (EOL) AND MAY NOT BE AVAILABLE**

• GV-IP Decoder Box Plus
• AC/DC adapter (12 V, 3 A, 36 W)
• Power cord
• USB Mouse
• Software DVD
• Warranty Card
• 
  
  • Decode video streams in H.264 codec up to 30 fps
  • Decode up to 4 megapixel IP cameras
  • Decode up to 64 IP streams
  • Automatically search for ONVIF IP devices
  • Support for third- party IP cameras that adhere to RTSP or ONVIF
  • Support for fisheye dewarping in Single View and top-left grid of Quad View
  • Single View, Quad View and 9-Division View in sequential display
  • Display of Matrix view through GV-Mobile Server
  • Support for 10/100/1000 Ethernet over LAN
  • VGA or HDMI Video output
  • Video output resolution up to 1080p
  • Control PTZ and Speed Dome cameras using GV-Joystick V2
  • SD card and USB drive for snapshot storage and firmware upgrade

• 
  

  Introduction

  The GV-IP Decoder Box Plus is designed to decode incoming IP streams from GeoVision and third-party IP devices, and to serve as a medium for connecting the cameras and the monitor for video display in Single View, Quad View, and 9-Division View. It supports third-party IP cameras that adhere to RTSP or ONVIF, and can automatically search for ONVIF supported third-party IP devices under the same LAN. To be used with only a monitor, the GV-IP Decoder Box Plus provides a cost-effective solution for video surveillance as opposed to the traditional DVR and PC setup. The security administrator can monitor channels, take snapshots of critical moments, and pause at a channel when events occur. GV-Joystick V2 can be installed to control GeoVision and third-party PT / PTZ / Speed Dome cameras.

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  Front View

  
  

  Rear View

  
  

  
  

  Firmware

  
  

  Datasheet_IPDecoderBoxPlus.pdf

  
  

  Name	Details
  Wall Mount Kit	The Wall Mount Kit is used to mount the GV-IP Decoder Box to the wall.
  GV-Joystick V2	The GV-Joystick facilitates focusing, zooming, panning, tilting of GeoVision and third-party PT, PTZ and Speed Dome cameras on GV-IP Decoder Box.

  
  

  Video
  Video Codec		H.264
  Audio Codec		G.711
  Maximum Resolution	1-ch Division	2048 x 1944
  	4-ch Division	Top-left grid: 2048 x 1944 Other grids: 1920 x 1080
  	9-ch Division	1280 x 720
  Video Output at 60 Hz	HDMI	720p / 1080p
  	VGA	1024 x 768
  Network
  Interface		10/100/1000 Ethernet
  Protocol		ONVIF, RTSP, TCP
  Mechanical
  Connectors	Power Adapter	12V DC Jack
  	Ethernet	RJ-45
  	Monitor Output	HDMI, VGA
  	Memory Card	SD/SDHC card slot (for Class 6 or above, FAT32 format)
  	USB 2.0	USB slot x 4 (2.0 backward compatible, FAT32 format)
  General
  Operating Temperature		0 °C ~ 40 °C (32 °F ~ 104 °F)
  Operating Humidity		20 % ~ 80 % (with no condensation)
  Weather Resistance		Indoor use only
  Dimensions (W x H x D)		162.3 × 34.4 × 107.6 mm (6.39” × 1.35” × 4.24")
  Net Weight		555 g (1.22 lb)
  Power		DC 12V
  Power Consumption		36 W (max. 3 A at 12V DC)
  Regulatory		CE, FCC, LVD, RCM compliant
  Language		English, French, German, Italian, Japanese, Portuguese, Russian, Spanish, Traditional Chinese

  
  

  The GV-IP Decoder Box Plus is compatible with: 1. GV-IP Camera, GV-Video Server and GV-Compact DVR using H.264 codec 2. Third-party IP devices that support H.264 and adhere to RTSP or ONVIF 3. GV-Mobile Server

  To decode and display non-H.264 IP channels or analog channels, connect the devices to GV-System (GV-DVR / NVR) and access them through GV-Mobile Server.