How to locate IP Camera on LAN via ConfigTool


ConfigTool/Locate iMaxCamPro Device via ConfigTool


Locate iMaxCamPro Device via ConfigTool


Description


  • How to locate and identify iMaxCamPro devices on LAN
  • Note: If your IP Camera is connected to the back of an NVR, these instructions will not apply. Please see, "How to Connect IP Camera to NVR"

Prerequisites


  • ConfigTool
  • PC
  • iMaxCamPro Devices on the same LAN as the PC

Step by Step Instructions

1. Download and install ConfigTool.

2. Run the ConfigTool.


3. Upon opening the ConfigTool application, here you can see iMaxCamPro Devices on the same LAN are located. Refresh if iMaxCamPro devices are not located. You can also manually locate the device by typing in the IP address of the device in the search.


https://www.worldeyecam.com/images/content/1_280.png


4. To view the device's web interface click on "Web" next to the device in the list.


https://www.worldeyecam.com/images/content/ekis_387.png


4. Login with to the device


https://www.worldeyecam.com/images/content/ekis_388.png