Image Resolution is too small
GeoVision
Back to GeoVision Support | Support Home
Back to GeoVision Support | Support Home
When using a GeoVision DVR card, the resolution of each channel available on the card is set by default to 320 px by 240 px (CIF resolution). If you want to increase this resolution, follow these three steps. Make sure you consult with the specifications for your card though, since an increase in resolution on some cards lowers the total frames per second that can be captured.
1. While MultiCam is running and monitoring is disabled, click on Configure->A/V Setting->Video Source
2. Choose the resolution for which you want the channels to be captured, and then click on OK to save your changes.
3. Click on the Power button in the bottom left-hand corner. Then choose Restart MultiCam->Restart by Startup Settings. This will restart the MultiCam software with the changes you made to the resolution.
2. Choose the resolution for which you want the channels to be captured, and then click on OK to save your changes.
3. Click on the Power button in the bottom left-hand corner. Then choose Restart MultiCam->Restart by Startup Settings. This will restart the MultiCam software with the changes you made to the resolution.
