8 Out Relay Lock Module 3A Fuse
LifeSafety Power C4/C8 C4P/C8P
Last updated
Mar 17, 2017
4 or 8 Output, Relay Based Lock Control Module Fused (C4, C8) or Class 2 Power Limited (C4P, C8P)
The FlexPower C4, C8 lock controller modules add either 4 or 8 lock control outputs to a FlexPower power supply and are typically supplied as part of a system or purchased as an expansion piece to an existing system.
Each module provides either 4 or 8 access control inputs capable of voltage or dry contact activation. Each module provides either 4 or 8 lock outputs, each one programmable for fail-safe, fail-secure, dry contact, and fire alarm override for egress lock control. Each lock output is also programmable to either of the two voltages available when used in a FlexPower dual voltage power system. Each output is supervised for voltage and/or blown fuse with the fault reported to the host power supply.
Agency Listings/Standards
Product listed for use in LifeSafety Power equipment
USA: UL 294, UL 603, UL 864, UL 1076, UL 1481, UL 2044, UL 2572, FCC Part 15, Subpart B CSFM Approved Canada: ULC S318, ULC S319, ULC S527, CSA C22.2#107.1, CSA 22.2 #60950
Electrical Ratings
| Parameter | Rating |
|---|---|
| Lock Outputs | 4 / 8 |
| Access Control Inputs | 4 / 8 |
| Input Voltage | 12 and/or 24 VDC |
| Input Current | 20 Amps |
| Output Voltage (Jumper Select) | 12/24 VDC |
| Output Current C4/C8 | Fused at 3A per output |
| Output Current C4P/C8P | Class II at 2.5A per output |
| Fire Alarm Interface | Per Output |
| Supports follow on modules | Yes |
Features
Flexibility
- Multiple outputs for direct lock control and additional accessory power distribution modules
- Colored coded by function configuration jumpers for ease of programming
- Configurable fail-safe, fail-secure, and dry contact modes of operation
- Fire Alarm Interface (FAI) when used with an FPO power supply
- Fault detection and reporting to host power supply
- FlexConnect® Dual Buss Architecture
Output Protection
- C4/C8 ATM style fuse: 3A/per output
- C4P/C8P Solid state circuit breaker: 2.5A/per output
Visual Indicators
- DC voltage per output (green LED)
- Fault (yellow LED)
Mechanical
- Multiple modules can be daisy chained to add additional outputs
- Snap-in style mounting standoffs with fast-on connect cables for easy field installation
Standard Features
One single switch for configuring the output between 12 and 24VDC eliminates field errors and allows for the reduction and simplification of service inventory by eliminating the necessity of stocking units in each voltage.
Power supply and accessory board interconnection system uses common mounting footprints, predrilled mounting holes, snap-in standoffs, pluggable wires, and a dual buss distribution architecture to simplify installation and service.
FPO power supplies are fully fault protected and feature fiberglass printed circuit boards to protect the electronics from water and other corrosive elements found in industrial settings. High efficiency design promotes low heat generation leading to longer service life.
FlexPower systems are RoHs compliant, lead-free, and meet the latest state, federal and European requirements for energy efficiency.
This module is typically part of an existing system or purchased to expand an existing system.
This module may also be used to add lock control features to an existing system that currently does not feature these functions.
This module may be added to any existing FlexPower system without restrictive agency listing issues.
D8P Module Programming
Each input may be programmed to respond to:
- Application of voltage between 9 and 33VDC
- Removal of voltage between 9 and 33VDC
- Normally open dry contact transition
- Normally closed dry contact transition
Detected Fault Conditions
- Voltage output from power supply one
- Voltage output from power supply two
- Fail-safe
- Fail-secure
- Normally open dry contact
- Normally closed dry contact
- Fire alarm interface for egress lock control
Ordering Information:
| MFG Part # | BluBØX Order # | Description |
|---|---|---|
| C4 | 670-1800 | LSP Relay Power Controller C4 4 Zone 3A Fused |
| C4P | 670-1810 | LSP Relay Power Controller C4P 4 Zone 2.5A PL |
| Mechanical Information | Size: 4” x 2.5” x 1.5” Weight: .50 lb. | |
| C8 | 670-1820 | LSP DC Power Distributor D8P 8 Zone 2.5A PL |
| C8P | 670-1830 | |
| Mechanical Information | Size: 6” x 4” x 1.5” Weight: .75 lb. | |
- Shipping info
We deliver worldwide
- Payment methods
- Return Policy
We accept returns
- Customer Reviews
Check out our customer Reviews
LifeSafety Power C4/C8 C4P/C8P
Last updated
Mar 17, 2017
4 or 8 Output, Relay Based Lock Control Module Fused (C4, C8) or Class 2 Power Limited (C4P, C8P)
The FlexPower C4, C8 lock controller modules add either 4 or 8 lock control outputs to a FlexPower power supply and are typically supplied as part of a system or purchased as an expansion piece to an existing system.
Each module provides either 4 or 8 access control inputs capable of voltage or dry contact activation. Each module provides either 4 or 8 lock outputs, each one programmable for fail-safe, fail-secure, dry contact, and fire alarm override for egress lock control. Each lock output is also programmable to either of the two voltages available when used in a FlexPower dual voltage power system. Each output is supervised for voltage and/or blown fuse with the fault reported to the host power supply.
Agency Listings/Standards
Product listed for use in LifeSafety Power equipment
USA: UL 294, UL 603, UL 864, UL 1076, UL 1481, UL 2044, UL 2572, FCC Part 15, Subpart B CSFM Approved Canada: ULC S318, ULC S319, ULC S527, CSA C22.2#107.1, CSA 22.2 #60950
Electrical Ratings
| Parameter | Rating |
|---|---|
| Lock Outputs | 4 / 8 |
| Access Control Inputs | 4 / 8 |
| Input Voltage | 12 and/or 24 VDC |
| Input Current | 20 Amps |
| Output Voltage (Jumper Select) | 12/24 VDC |
| Output Current C4/C8 | Fused at 3A per output |
| Output Current C4P/C8P | Class II at 2.5A per output |
| Fire Alarm Interface | Per Output |
| Supports follow on modules | Yes |
Features
Flexibility
- Multiple outputs for direct lock control and additional accessory power distribution modules
- Colored coded by function configuration jumpers for ease of programming
- Configurable fail-safe, fail-secure, and dry contact modes of operation
- Fire Alarm Interface (FAI) when used with an FPO power supply
- Fault detection and reporting to host power supply
- FlexConnect® Dual Buss Architecture
Output Protection
- C4/C8 ATM style fuse: 3A/per output
- C4P/C8P Solid state circuit breaker: 2.5A/per output
Visual Indicators
- DC voltage per output (green LED)
- Fault (yellow LED)
Mechanical
- Multiple modules can be daisy chained to add additional outputs
- Snap-in style mounting standoffs with fast-on connect cables for easy field installation
Standard Features
One single switch for configuring the output between 12 and 24VDC eliminates field errors and allows for the reduction and simplification of service inventory by eliminating the necessity of stocking units in each voltage.
Power supply and accessory board interconnection system uses common mounting footprints, predrilled mounting holes, snap-in standoffs, pluggable wires, and a dual buss distribution architecture to simplify installation and service.
FPO power supplies are fully fault protected and feature fiberglass printed circuit boards to protect the electronics from water and other corrosive elements found in industrial settings. High efficiency design promotes low heat generation leading to longer service life.
FlexPower systems are RoHs compliant, lead-free, and meet the latest state, federal and European requirements for energy efficiency.
This module is typically part of an existing system or purchased to expand an existing system.
This module may also be used to add lock control features to an existing system that currently does not feature these functions.
This module may be added to any existing FlexPower system without restrictive agency listing issues.
D8P Module Programming
Each input may be programmed to respond to:
- Application of voltage between 9 and 33VDC
- Removal of voltage between 9 and 33VDC
- Normally open dry contact transition
- Normally closed dry contact transition
Detected Fault Conditions
- Voltage output from power supply one
- Voltage output from power supply two
- Fail-safe
- Fail-secure
- Normally open dry contact
- Normally closed dry contact
- Fire alarm interface for egress lock control
Ordering Information:
| MFG Part # | BluBØX Order # | Description |
|---|---|---|
| C4 | 670-1800 | LSP Relay Power Controller C4 4 Zone 3A Fused |
| C4P | 670-1810 | LSP Relay Power Controller C4P 4 Zone 2.5A PL |
| Mechanical Information | Size: 4” x 2.5” x 1.5” Weight: .50 lb. | |
| C8 | 670-1820 | LSP DC Power Distributor D8P 8 Zone 2.5A PL |
| C8P | 670-1830 | |
| Mechanical Information | Size: 6” x 4” x 1.5” Weight: .75 lb. | |
The mission of WorldEyeCam, Inc.is to provide consumers with the most up to date security products at the best prices available on the market today. As security is advancing at such a rapid rate we try to exceed our customers expectations by providing unparallel customers service and technical support. We strive to stay on the forefront of the most up to date products and news in regards to our industry. Our website www.Worldeyecam.com contains a broad spectrum of surveillance products as well as industry information. Our website is updated daily as we make our way through this technological wave of security products. Our goal and focus is to stay on top of the latest innovations in technology and securities and to remain a trusted industry leader for years to come.
WorldEyeCamis a CCTV products distribution and integration company located in Southern California in the heart of Orange County. We operate out of a 14,000 sq.ft warehouse & a separate product demo show room. We proudly offer 1st class technical support for our customers we serve with the complete understanding that it is you, the customer that matters to every successful business. If you haven't already learned the hard way, you will understand that it takes more than just a website and the ability to sell a product - anyone can sell a product! But, it takes commitment to offerDEPENDABLE AND CONSISTENT technical support & customer SERVICE AFTER THE SALE. We stand behind our products 100% and we are in it for the long haul & to keep you, the customer happy.
Why Buy From The Worldeyecam Security Store. 30 Day Money Back Guarantee Latest Product Version Guarantee Fast Accurate Same Day Shipping Friendly customer service.
We are committed to providing our customers with "Complete Purchasing Experience Satisfaction" This means quality customer service from pre-purchase support, easy secure encrypted ordering, fast UPS shipping , comprehensive after sales tech-support by certified professionals and hassle free returns.
Shipping Information
FREE UPS Ground Shipping Continental US addresses on all orders over $1000.00 All in stock items are usually shipped Same Day (*not including weekends and holidays). For any Order for Bulk Cables that weigh over 75 lbs will be charged extra. Orders placed before 3 pm PST, or 2 pm for Expedited orders (Next Business Day Air or 2nd Business Day Air) can usually be shipped the same day. Orders placed by internet or by phone receive the same priority handling.
Why Buy From The Worldeyecam Security Store. 30 Day Money Back Guarantee Latest Product Version Guarantee Fast Accurate Same Day Shipping Friendly customer service.
We are committed to providing our customers with "Complete Purchasing Experience Satisfaction" This means quality customer service from pre-purchase support, easy secure encrypted ordering, fast UPS shipping , comprehensive after sales tech-support by certified professionals and hassle free returns.
Shipping Information
FREE UPS Ground Shipping Continental US addresses on all orders over $1000.00 All in stock items are usually shipped Same Day (*not including weekends and holidays). For any Order for Bulk Cables that weigh over 75 lbs will be charged extra. Orders placed before 3 pm PST, or 2 pm for Expedited orders (Next Business Day Air or 2nd Business Day Air) can usually be shipped the same day. Orders placed by internet or by phone receive the same priority handling.
Security Guaranteed
We use SSL (Secure Sockets Layer) encryption technology to ensure a secure end-to-end link We will never share your personal information, including your email address, with anyone or any company for any reason (except as required by law.)
This site uses the latest encryption technology to ensure that every transaction is a safe one. All transactions are processed over the Secure Socket Layer (SSL).Ordering from Worldeyecam online is very Safe and Secure. From the moment you enter our Shopping Basket or click on Checkout, you are on a secure server, We use what is called SSL (secure socket layer) technology. We use the highest bit encryption with SSL at 128 bits. Your credit cards are encrypted when they are transmitted to us and are stored in a secure environment.
